top of page

Schoeps Replacement Screw Set for CMC 6 / CMC 5 housing sleeves, Torx M3 TX5, stainless steel, Set of 3.


*Use with matte gray, nickel finish or any custom color CMC


Install Note: When removing sleeve you must turn screws clockwise into body and then sleeve is pulled off. Be careful not to turn screws too far into the housing. Turn old screws counter-clockwise to remove. Reverse process for new screw install and do not over-tighten new screws up into the sleeve or it can be damaged. 


Dimensions: 3mm x 3mm x 3mm


Related Products: CMC 6, CMC 5, CMC 4, CMC 3

Schoeps Housing Sleeve Screw Set for CMC 6

    bottom of page